Pathmaker Programming Guide

Creating a NonStop SQL Pathmaker Application
Sample Pathmaker Sessions
067868 Tandem Computers Incorporated 10–51
Figure 10-22. SEND Parameter Definition Screen
S E N D P A R A M E T E R D E F I N I T I O N
==============================================================================
Requester: SQL-ORDER-TAKER Function Key: F4
To Service: SQL-PLACE-ORDER
Requester Reference Field B/A
SEND: PARTS________________________________________________________ A
TO: PARTS
SEND: ORDERS_______________________________________________________ A
TO: ORDERS
RECV: PARTS________________________________________________________ A
FROM: PARTS
RECV: ORDERS_______________________________________________________ A
FROM: ORDERS
_____________________________________________________________ _
_____________________________________________________________ _
_____________________________________________________________ _
_____________________________________________________________ _
==============================================================================
F2-Update F4-List F5-Next F9-Value List F16-Return
SEND parameters listed--parameters have been created
BLOCK
Check your screen to determine if it matches the one shown in Figure 10-22.
You should not have to change any of the entries on this screen. Press F16
(twice) to return to the Requester Definition screen.
i. Generate the requester.
Press F7 from the Requester Definition screen to reach the Requester
Generation Data screen.
You can enter a valid source file name and a listing device for your system, if
you want. (You do not need to specify a source file or a listing device to
generate a requester.) Press F2 to update this screen.
Press F16 to return to the Requester Definition screen. From the Requester
Definition screen, press shifted F6 to begin generating this requester. You can
check on the status of the generation later by returning to the Requester
Generation Data screen for this requester.