Pathmaker Reference Manual

Requester Generation Data Screen
Pathmaker Screens
1–112 067869 Tandem Computers Incorporated
If you leave this field blank and there are compilation errors, the Pathmaker product
creates a temporary file to contain the errors. The temporary file's name is:
ZZPML
nnn
where
nnn
is a 3-digit number. To correct the errors, edit the requester copy library
for the requester. The ZZPML file is not deleted automatically unless no errors are
encountered. If errors are encountered, you must delete it manually when you are
finished with it, .
Created By and At
Displays the user ID of the person who created this requester. The At field displays
the date and time when this requester was created. You cannot type in these fields.
Modified By and At
Displays the user ID of the person who last modified this requester. The At field
displays the date and time of the modification. You cannot type in these fields.
Successfully Generated at
Displays the date and time this requester was last successfully generated. An
unsuccessful attempt to generate the requester does not change the value of this field.
You cannot enter data into this field.
To find out whether the requester is still being generated, you can also use:
The Requester Value List screen
If a requester is still being generated when you list requesters on the Requester
Value List screen, the Title field for that requester displays the message
“Requester in Use.”
Enform
Press function key SF13 to navigate to the Utility Menu, then press F6 to start
Enform. Enter the following commands to run the Requester Generation Status
report, PM20:
DICTIONARY
$rls.subvol
>?OUT
$s.#prt
>?SOURCE
$rls.subvol.
PMQUERYS(PM20)
In this example,
$rls.subvol
is the subvolume where the Pathmaker product is
installed, and
$s.#prt
is the name of the printer or output file.
To run this report, the Dictionary must be set up and usable.
You can also return to the Requester Generation Data screen while the requester is
being generated. One of these messages is displayed:
"Record is currently locked— try again later"
“Generation has been initiated.”