Pathmaker Reference Manual

Simulation Screen
Pathmaker Screens
067869 Tandem Computers Incorporated 1–177
Roll Down-Exit
Press ROLL DOWN to exit from simulation.
If you are using a 6520, 6530, or 6526 terminal, you can exit from simulation either by
pressing the function key you designated in the Function Key Assignment screen as
the exit key or by pressing ROLL DOWN.
If you are using a 6AX terminal, you can exit by pressing the designated exit key or by
pressing the ALT key and the down-arrow key (number 2 on the right-hand numeric
keypad) at the same time.
S-Roll Down-Print Screen
Press SHIFT plus ROLL DOWN to print the current screen.
If you are using a 6520, 6530, or 6526 terminal, press the SHIFT key and the ROLL
DOWN key at the same time to print the screen.
If you are using a 6AX terminal, press the ALT key, the SHIFT key, and the down-
arrow key (number 2 on the right-hand numeric keypad) at the same time to print the
screen.