Pathmaker Reference Manual

Access Path Value List Screen
Pathmaker Screens
067869 Tandem Computers Incorporated 1–3
Functions The following paragraphs summarize the functions available on the Access Path Value
List screen, including those functions that are not displayed on the screen.
F1-Select
Selects a starting point for the Access Path Value List. To select an item, move the
cursor to the name in the Path Name column and press F1. The path name is then
displayed in the Access Path Name field at the top of the screen.
F4-List
Lists path names, beginning with the name that matches the one in the Access Path
Name field. If the Access Path Name field is blank, the Pathmaker product begins the
list with the first access path associated with the table. Type a name in the Access Path
Name field or use F1 to select a starting point for the list.
F5-List Next
Lists a following set of access path names.
F10-Select & Return
Selects an item on the Access Path Value List and returns to the previous screen where
the path name is shown. To select and return an item, move the cursor next to the
name in the Path name column and press F10.
F14-Print Screen
Prints the Access Path Value List screen.
F15-Help
Shows online help for the item near the cursor—a data field, the function key list, or
the entire screen. To access help for the entire screen, place the cursor by the screen
title. When you are in help, use the NEXT PAGE, ROLL UP, PREV PAGE, and ROLL
DOWN keys to see more help text for the current Pathmaker screen.
F16-Return
Returns to the previous screen.
SF13-Utility Menu
Accesses the Utility Menu screen, where you can use TEDIT, FUP, PERUSE, SCUP,
DDL, ENFORM, or SQLCI without leaving the Pathmaker full screen interface.
SF14-Recover Screen
Shows the screen as the Pathmaker product last showed it, undoing any typing that
you did since you last saved or showed the data on this screen.
SF16-Exit
Returns to the Pathmaker Main Menu screen.