Pathmaker Reference Manual

Process Configuration Screen
Pathmaker Screens
067869 Tandem Computers Incorporated 1–63
Process Configuration
Screen
Use the Process Configuration screen to view and modify the configuration of a
predefined process.
The configuration of a predefined process describes the location of the actual program
module, the swap file name, the run-time priority, the memory size, and a list of
available CPUs.
The Program File name, Priority, and Memory Page fields are usually set when the
Pathmaker product is installed, but you can change and update these values.
019
P R O C E S S C O N F I G U R A T I O N
==============================================================================
Logical Name: C_____________________________
Program File: $SYSTEM.SYSTEM.C______
Swap Volume: ________________
Priority: 140
Memory Pages: 64
CPUs: (Use nonblank character to indicate selection)
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
X X X X _ _ _ _ _ _ _ _ _ _ _ _
==============================================================================
F2-Update F4-List F16-Return
F5-List Next SF16-Exit
Process configuration listed
BLOCK
Displaying the Screen You reach the Process Configuration screen by pressing F11 from the Pathmaker Main
Menu.
Field Descriptions The following paragraphs describe the fields on the Process Configuration screen.
Logical Name
Use the Logical Name field to start the list of processes at a particular process name.
You cannot add new logical process names of your own.
When you enter this screen, the first predefined logical name for a process is shown on
this field. You can view the next logical process name by pressing F5. If you want so
see a different process, type a process name in this field and press F4.