Pathmaker Reference Manual

Process Configuration Screen
Pathmaker Screens
067869 Tandem Computers Incorporated 1–65
Memory Pages
Enter a value from 1 through 64 for the maximum number of virtual data pages to be
allocated to the process. This value determines the amount of process control
information that can reside in memory.
The default maximum number of virtual data pages is 64.
CPUs
Enter any nonblank character in the fields under the CPU numbers to select the CPUs
to run the process. You can select one or any number of CPUs, odd or even, up to all
16.
Functions The following paragraphs summarize the functions available on the Process
Configuration screen, including those functions that are not displayed on the screen.
F2-Update
Updates process configuration information into the Pathmaker project catalog.
F4-List
Displays the configuration for the specified process.
F5-List Next
Displays configuration information for a following process in the project catalog.
F14-Print Screen
Prints the Process Configuration screen.
F15-Help
Shows online help for the item near the cursor—a data field, the function key list, or
the entire screen. To access help for the entire screen, place the cursor by the screen
title. When you are in help, use the NEXT PAGE, ROLL UP, PREV PAGE, and ROLL
DOWN keys to see more help text for the current Pathmaker screen.
F16-Return
Returns to the previous screen.
SF13-Utility Menu
Accesses the Utility Menu screen, where you can enter DDL, EDIT, ENFORM, FUP,
PERUSE, SCUP, or SQLCI without leaving the Pathmaker full screen interface.
SF14-Recover Screen
Shows the screen as the Pathmaker product last showed it, undoing any typing that
you did since you last saved or showed the data on this screen. You can use this
function to recover the screen after a terminal error.