Pathway/iTS 1.0 README for S Systems

ManualsBrandsHP ManualsServerHP NonStop G-Series

READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION

Product Name: Compaq NonStop(TM) Pathway/iTS for S Systems

Export Control Classification Number (ECCN): 5D992 MO

Product ID: SR76V1

Component Products:

Component Pathway/iTS T-number(s) (FCS version):

T0524 - iTS Gateway

T0526 - SCOBOL Java Package

T0527 - iTS Connection Router

T0528 - iTS SCOBOL

T0529 - iTS Client Object Manager

T0570 - XML4Pathway/iTS

T0577 - Pathway/iTS License

DATE: This ReadMe file was last updated 03 November 2000.

I. Basic Product Installation Instructions

1. Ensure that requirements for using this product are met

(see Section IV Product Requirements below).

2. Ensure that prerequisites for the installation utility and any

product-specific installation requirements are met

(see Section V Installation Prerequisites below).

3. Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on this

CD) containing the IPSetup User Guide, which provides instructions

for using IPSetup, a utility provided on the CD that enables

installation of Independent Products. You need version 3.0 or

later of Adobe Acrobat Reader or Exchange to read or print the

IPSetup User Guide and NonStop(TM) Pathway/iTS Documentation.

Obtain the Reader by downloading it from the following URL:

http://www.adobe.com/prodindex/acrobat/readstep.html

4. Use either of the following methods to move/copy files to the

Installation Subvolumes: (A) IPSetup only, or (B) IPSetup in

conjunction with DSM/SCM.

5. Follow the pre-installation instructions in Section II below, if

any, before continuing to Step 6.

6. If you use DSM/SCM to move the files to the Installation

Subvolumes, ensure that you check the "Use DSM/SCM" box and run

all phases of DSM/SCM.

If you normally use INSTALL to install new software, run IPSetup

and uncheck the "Use DSM/SCM" box, to allow IPSetup to move the

NonStop(TM) Kernel files to the correct ISVs.

If TCP/IP and FTP are unavailable, or if you have problems

with automatic file placement, use the instructions in the

IPSetup User Guide section "Manual Software Placement Using

the IPSetup TACL Program" to manually place NonStop(TM) Kernel

files.

file:///C|/READMEs PATHWAY/PathwayiTS 1.0/ReadmePwyiTS15Ssystems.txt

file:///C|/READMEs PATHWAY/PathwayiTS 1.0/ReadmePwyiTS15Ssystems.txt (1 of 9) [4/27/2004 11:11:25 AM]

Summary of content (9 pages)

PAGE 1
file:///C|/READMEs PATHWAY/PathwayiTS 1.0/ReadmePwyiTS15Ssystems.
PAGE 2
file:///C|/READMEs PATHWAY/PathwayiTS 1.0/ReadmePwyiTS15Ssystems.txt Note: Compaq recommends that you move/copy the files by using either DSM/SCM or IPSetup for each distribution CD in the Pathway/iTS product set (iTS Gateway components, the SCOBOL Java Package, the Connection Router, and Client Object Manager) to place all the files on the NonStop(TM) Kernel system. 7. Follow the post-installation instructions in Section III below, if any, after using IPSetup to place and install this product. II. 1.
PAGE 3
file:///C|/READMEs PATHWAY/PathwayiTS 1.0/ReadmePwyiTS15Ssystems.txt 3. All files on the subvolume $SYSTEM.ZPATHWAY must be secured "nxnx" for the Pathway products to work with the new licensing checking mechanism. The "x" value indicates any valid Guardian security setting (A, G, O, N, C, U, or -). 4. In $SYSTEM.ZPITS subvolume, run GATWYPAK to extract the POBJCOD and POBJDIR files of the compiled SCOBOL Gateway requester. 5. To install the SCOBOL Java Package, type the command: RUN $SYSTEM.ZOSSUTL.
PAGE 4
file:///C|/READMEs PATHWAY/PathwayiTS 1.0/ReadmePwyiTS15Ssystems.txt whenever possible, and recovery will be in the user's control. If there is no user error recovery, the TCP will take its own action on terminal errors. IV. Product Requirements Required Hardware: NonStop(TM) RISC-based Systems Minimum OS Release: NonStop(TM) Kernel release D45 or G05.
PAGE 5
file:///C|/READMEs PATHWAY/PathwayiTS 1.0/ReadmePwyiTS15Ssystems.txt T9550D40 SOCKET LIBRARY or higher version T9552D40 TCP/IP FTP with IPM ABJ or superseding IPM (for releases D40.01 and higher) Microsoft Windows NT 4.0 or later Microsoft TCP/IP stack and FTP client VI.
PAGE 6
file:///C|/READMEs PATHWAY/PathwayiTS 1.0/ReadmePwyiTS15Ssystems.txt version 3.0 or later of Adobe Acrobat Reader or Exchange. The URL for downloading the Acrobat Reader is: http://www.adobe.com/prodindex/acrobat/readstep.html tim_coll Subdirectory containing all PDF format and HTML-format documentation that will be available through the TIM (Total Information Manager). VIII. Known Problem List Refer to the SOFTDOCS of the individual components for the list of known problems.
PAGE 7
file:///C|/READMEs PATHWAY/PathwayiTS 1.0/ReadmePwyiTS15Ssystems.txt iii) Creates a make file with the name specified in the command line and copies this make file to /build as .mk b) Set the CLASSPATH environment variable to point to ITSJLIB.jar as follows: export CLASSPATH=/usr/tandem/Pathway-iTS/itsjlib.jar:$CLASSPATH Also, other environment variables must also be set for Java compilation. For example, /usr/tandem/java/bin must be added to $PATH, and /usr/tandem/java/lib/classes.
PAGE 8
file:///C|/READMEs PATHWAY/PathwayiTS 1.0/ReadmePwyiTS15Ssystems.txt 01, 05, 10 and 20. 01 WS-RECORD. 05 WS-PERSONAL-DETAILS 10 WS-NAME 10 WS-ADDRESS. 20 WS-ADDRESS-LINE-1 20 WS-ADDRESS-LINE-2 20 WS-ADDRESS-LINE-3 Known workarounds: a) Manually inspect the data structure and remove unused group level declarations.
PAGE 9
file:///C|/READMEs PATHWAY/PathwayiTS 1.0/ReadmePwyiTS15Ssystems.txt is handled in the generated Java code. In SCOBOL, after the execution of the ON ERROR clause, the execution continues with the statement next to the BEGIN-TRANSACTION statement. But, in the generated Java code, after the execution of the ON ERROR clause, the control returns to the caller of the program unit. The caller of the program unit catches InvocationTargetException.