Pathway/iTS System Management Manual (G06.24+)

HP NonStop Pathway/iTS System Management Manual—426748-002
xi
What’s New in This Manual
Manual Information
HP NonStop Pathway/iTS System Management Manual
Abstract
This manual describes the management interface to the HP NonStop™ Pathway/iTS
product; it is intended for system managers and operators. It provides instructions and
guidelines for configuring and controlling the Patshway/iTS objects (those related to
terminal control processes (TCPs), terminals, and intelligent devices) and for
monitoring the status and performance of those objects. It also provides syntax and
complete descriptions of all PATHCOM commands for Pathway/iTS objects and cause,
effect, and recovery information for all TCP error messages.
Product Version
Pathway/iTS 1.0
Supported Release Version Updates (RVUs)
This publication supports D42.00 and all subsequent D-series RVUs and G02.00 and
all subsequent G-series RVUs, H06.03 and all subsequent H-series RVUs until
otherwise indicated by its replacement publications.
Document History
New and Changed Information
Changes in the G06.28 manual:
•
Changed the maximum number of concurrently running requester processes from
150 to 800 under MAXTCPS number on page 8-2.
•
Rebranded the terminology in the manual.
Changes in the G06.27 manual
The HP NonStop Pathway/iTS product was formerly called Pathway/TS. For the
Pathway/iTS 1.0 independent product release, the product was renamed to conform to
Part Number Published
426748-002 February 2006
Part Number Product Version Published
120040 Pathway/TS D42 August 1996
426748-001 Pathway/iTS 1.0 October 2000
426748-002 Pathway/iTS 1.0 February 2006