Pathway/iTS System Management Manual (G06.24+)

Overview of PATHCOM
HP NonStop Pathway/iTS System Management Manual—426748-002
7-2
Command List
The relationships illustrated in Figure 7-1 apply for all of the PATHCOM commands and
the PATHMON-controlled objects. Some PATHCOM commands affect only certain
objects and their operation. For example, the ADD TERM command affects only
configured TERM objects and the ALTER PROGRAM command affects only
PROGRAM objects.
Command List
Table 7-1 on page 7-3 is a list of the commands you can execute using PATHCOM to
create and manage Pathway/iTS objects. The table entries provide the name of the
command, its description, and the names of the objects influenced by the command.
For PATHCOM commands that create and manage the TS/MP objects and control and
operate PATHCOM itself, and for TACL commands that start the PATHMON and
PATHCOM processes, see the TS/MP System Management Manual.
Figure 7-1. PATHCOM Commands and Object States
Note. The PATHMON process reports only destination object states; it does not report
transitional states. To determine the current state of an object, use the appropriate STATUS
command.
Object
Configured/Stopped
Object
Running
Object
Unconfigured
SHOW ADD RESET SET
ALTER INFO STATUS DELETESTART
CONTROL SWITCH PRIMARY STOP
INFO REFRESH-CODE STATSSTATUS
VST004.vsd