Pathway/iTS System Management Manual (G06.24+)

Pathway Environment Control Commands
HP NonStop Pathway/iTS System Management Manual—426748-002
8-4
Other Commands
Example
The following SET PATHWAY commands define requester-based elements in an
example PATHMON environment:
SET PATHWAY MAXEXTERNALTCPS 5
SET PATHWAY MAXPROGRAMS 1
SET PATHWAY MAXTCPS 4
SET PATHWAY MAXTELLQUEUE 5
SET PATHWAY MAXTELLS 50
SET PATHWAY MAXTERMS 25
SET PATHWAY MAXTMFRESTARTS 5
Other Commands
Other Pathway environment control commands that can impact Pathway/iTS objects
are as follows:
For information about these commands, see the TS/MP System Management Manual.
Note. The configuration in this example does not include server-based objects that run under
TS/MP, nor does it include the global PATHWAY and PATHMON objects.
Command Function or Effect on Pathway/iTS Objects
INFO PATHMON Displays information about TCP, TERM, and PROGRAM objects
INFO PATHWAY Displays information about TCP, TERM, and PROGRAM objects
LOG1 and LOG2 Specifies files to which TCP objects report errors and changes in
object status
SHUTDOWN Stops TCP objects
SHUTDOWN2 Stops TCP and TERM objects, and disables commands to add, alter,
or delete TCP, TERM, and PROGRAM objects, and commands to
delete TELL objects
START PATHWAY Potentially affects definitions of TCP, TERM, and PROGRAM objects
in the PATHMON configuration file