Pathway/iTS System Management Manual (G06.24+)

Terminal Control Process (TCP) Commands

HP NonStop Pathway/iTS System Management Manual—426748-002

9-10

INFO TCP Command

Use the INFO TCP command to display the attribute values defined in the PATHMON

configuration file for a TCP. This command does not display information about external

TCPs (TCPs that are controlled by another PATHMON process and are therefore

outside this PATHMON environment).

OUT list-file

directs output to the named list file; this could be a DEFINE name. If this option is

omitted, the PATHMON process directs the output to the PATHCOM list file; this is

typically the home terminal.

tcp-name

specifies the name of a TCP. You can use either a single TCP name or several

TCP names separated by commas and enclosed in parentheses.

TCP *

displays the attribute values for all TCPs described in the PATHMON configuration

file. If option is specified, displays the attribute values for all TCPs meeting the

criteria specified.

STATE state-type

specifies the state of the multiple TCPs. Possible values are:

PENDING NOT PENDING

RUNNING NOT RUNNING

STOPPED NOT STOPPED

This option displays the attribute values for TCPs in any state.

You can substitute SEL for STATE.

INFO [ / OUT list-file / ]

{ [ TCP ] tcp-name }

{ [ TCP ] (tcp-name [ , tcp-name ]...) }

{ TCP * [ , option [ , option ] ] }

[ , OBEYFORM ]

option is:

STATE state-type

OBEYFORM