Pathway/iTS System Management Manual (G06.24+)

Terminal Control Process (TCP) Commands
HP NonStop Pathway/iTS System Management Manual—426748-002
9-18
SET TCP Command
SET TCP Command
Use the SET TCP command to establish the values for the TCP object attributes.
See Section 2, Configuring Pathway/iTS Objects, for more information on configuring
TCPs.
tcp-attribute
The following two attributes (the first two attributes listed above) have no defaults;
you must specify them before adding a TCP definition:
MAXTERMS
TCLPROG
The rest of the attributes have default values.
SET TCP tcp-attribute [ , tcp-attribute ]...
tcp-attribute is:
MAXTERMS number
TCLPROG file-name
AUTORESTART number
CHECK-DIRECTORY { ON | OFF }
CODEAREALEN double-number
CPUS primary : backup
DEBUG { ON | OFF }
DUMP { ON [ ( FILE file-name ) ] | OFF }
GUARDIAN-LIB file-name
GUARDIAN-SWAP $volume
HIGHPIN { ON | OFF }
HOMETERM file-name
INSPECT { ON [ ( FILE file-name ) ] | OFF }
LIKE tcp-name
MAXINPUTMSGLEN number
MAXINPUTMSGS number
MAXPATHWAYS number
MAXREPLY bytes
MAXSERVERCLASSES number
MAXSERVERPROCESSES number
MAXTERMDATA bytes
NONSTOP { 0 | 1 }
POWERONRECOVERY { ON | OFF }
PRI priority
PROCESS $process-name
PROGRAM file-name
SENDMSGTIMEOUT { ON | OFF }
SERVERPOOL bytes
STATS { ON | OFF }
SWAP $volume
TERMBUF bytes
TERMPOOL bytes