Pathway/iTS System Management Manual (G06.24+)

Terminal Control Process (TCP) Commands
HP NonStop Pathway/iTS System Management Manual—426748-002
9-35
STATS TCP Command
STATS TCP Command
Use the STATS TCP command to display resource usage and performance statistics
collected by the TCP. These statistics provide information about TCP operations and
data space allocations. This command does not display statistics for any external
TCPs (TCPs that are controlled by another PATHMON process and are therefore
outside this PATHMON environment) that might be linked to local server processes.
The STATS attributes of the SET TCP command and the CONTROL TCP command
control the gathering of these statistics.
OUT list-file
directs output to the named list file; this could be a DEFINE name. If this option is
omitted, the PATHMON process directs the output to the PATHCOM list file; this is
typically the home terminal.
tcp-name
specifies one or more TCPs. tcp-name can be either the name of a single TCP or
several TCP names separated by commas and enclosed in parentheses.
TCP *
displays statistics for all TCPs described in the PATHMON configuration file.
If option is specified, displays statistics for all TCPs meeting the criteria specified.
STATS [ / OUT list-file / ]
{ [ TCP ] tcp-name }
{ [ TCP ] ( tcp-name [ , tcp-name ]... ) }
{ TCP * [ , option [ , option ]... ] }
[ , tcp-attribute [ , tcp-attribute ]... ]
option is:
STATE state-type
COUNT number
DETAIL
FREQTABLE
INTERVAL number { HRS | MINS | SECS }
RESET
tcp-attribute is:
COUNT number
DETAIL
FREQTABLE
INTERVAL number { HRS | MINS | SECS }
RESET