Pathway/iTS System Management Manual (G06.24+)

Terminal Control Process (TCP) Commands
HP NonStop Pathway/iTS System Management Manual—426748-002
9-38
STATUS TCP Command
OUT list-file
directs output to the file that you specify; this could be a DEFINE name. If you omit
this option, the PATHMON process writes the output to the PATHCOM list file; this
is typically the home terminal.
tcp-name
specifies the name of a previously defined and added TCP.
E\node.$process-name
specifies the name of an external TCP (a TCP that is controlled by another
PATHMON process and, therefore, is outside this PATHMON environment).
DETAIL
includes status information on the terminals controlled by the specified TCPs. The
DETAIL option does not display status information for external TCPs.
TCP *
displays the status of all local and external TCPs defined for the PATHMON
environment.
STATE state-type
specifies the state of the multiple TCPs. Possible values are:
PENDING NOT PENDING
RUNNING NOT RUNNING
STOPPED NOT STOPPED
This option displays status information for TCPs in any state.
You can substitute SEL for STATE.
E indicates an external TCP name.
\node specifies the name of the NonStop system on which the TCP
is running. This can be the same or different from the system
on which the PATHMON process is running.
$process-name specifies the external TCP name.