Pathway/iTS System Management Manual (G06.24+)

Terminal Control Process (TCP) Commands
HP NonStop Pathway/iTS System Management Manual—426748-002
9-39
STATUS TCP Command
Display Format Without DETAIL
The format of the display returned by the STATUS TCP command without the DETAIL
option is shown below.
The fields in this display are as follows:
Display Format With DETAIL
The format of the display returned by the STATUS TCP command with the DETAIL
option is shown below.
TCP STATE ERROR INFO PROCESS CPUS
tcp-name state pw-error info process-name pri:backup
. . . . . .
. . . . . .
. . . . . .
Display Field Description
TCP Name of the TCP
STATE Current state of the TCP. Possible values are:
STOPPED TCP is stopped
PENDING TCP received a STOP command
RUNNING TCP is running and capable of controlling terminals
ERROR PATHMON environment error number
INFO Additional information regarding the error number. See the error
messages listed in Section 13, TCP Messages (Numbers 3000-3999)
.
PROCESS Guardian process name of the TCP
CPUS Current primary and backup CPUs (which is not necessarily the same as
those configured).
TCP STATE ERROR INFO PROCESS CPUS
tcp-name state pw-error info process-name pri:backup
. . . . . .
. . . . . .
. . . . . .
TERM WAIT PENDING ACCEPT STOPMODE TRANSMODE
term-name wait-cause pend-cause accept stopmode transmode
[ RECOVERING ]
. . . . . .
. . . . . .
. . . . . .