Pathway/iTS System Management Manual (G06.24+)

TERM Commands
HP NonStop Pathway/iTS System Management Manual—426748-002
10-8
INFO TERM Command
INFO TERM Command
Use the INFO TERM command to display the attribute values defined in the
PATHMON configuration file for a TERM object.
This command can be issued for configured and temporary TERM objects.
OUT list-file
directs output to the named list file; this could be a DEFINE name. If this option is
omitted, the PATHMON process directs the output to the PATHCOM list file; this is
typically the home terminal.
term-name
specifies the name of a TERM object. You can use either a single TERM name or
several TERM names separated by commas and enclosed in parentheses.
TERM *
displays the attribute values for all TERM objects described in the PATHMON
configuration file. If option is specified, displays the attribute values for all TERM
objects meeting the criteria specified.
STATE state-type
specifies the state of the multiple TERM objects. Possible values are:
RUNNING NOT RUNNING
STOPPED NOT STOPPED
SUSPENDED NOT SUSPENDED
This option displays the attribute values for TERM objects in any state.
You can substitute SEL for STATE.
TCP tcp-name
displays information about all TERM objects controlled by the specified TCP.
INFO [ / OUT list-file / ]
{ [ TERM ] term-name [ , OBEYFORM ] }
{ [ TERM ] (term-name [, term-name ]...) [ , OBEYFORM ] }
{ TERM * [ , option [ , option ]... ] }
option is:
STATE state-type
TCP tcp-name
OBEYFORM