Pathway/iTS System Management Manual (G06.24+)

TERM Commands
HP NonStop Pathway/iTS System Management Manual—426748-002
10-13
RESET TERM Command
RESET TERM Command
Use the RESET TERM command to change the values for TERM object attributes from
the ones you defined with the SET TERM command to the defaults. This command
does not change the attributes of a TERM object already added to the PATHMON
configuration file.
This command can be issued only to configured TERM objects.
term-keyword
specifies one or more attributes to be reset.
If you omit term-keyword, this command resets all attribute values to the
defaults.
Considerations
•
If you invoke the RESET TERM command after the SET TERM command but
before the ADD TERM command, the attribute values you specify revert to the
default values.
•
Some required SET TERM command attributes have no default values. If you
include a required attribute in the RESET TERM command, the attribute is set to a
null value and must be set again before you add the TERM description to the
PATHMON configuration file.
If an attribute is not required and does not have a default value, the RESET TERM
command deletes the value for the attribute.
Examples
The following command resets all attribute values:
RESET TERM
The following commands reset the values for the specified attributes:
RESET TERM PRINTER
RESET TERM DIAGNOSTIC,TMF
RESET TERM [ term-keyword [ , term-keyword ]... ]
term-keyword is:
AUTORESTART FILE TCLPROG
BREAK INITIAL TCP
DIAGNOSTIC INSPECT TMF
DISPLAY-PAGES IOPROTOCOL TRAILINGBLANKS
ECHO MAXINPUTMSGS TYPE
EXCLUSIVE PRINTER