Pathway/iTS System Management Manual (G06.24+)

TERM Commands
HP NonStop Pathway/iTS System Management Manual—426748-002
10-16
SET TERM Command
SET TERM Command
Use the SET TERM command to define values for the TERM object attributes.
This command can be issued only to configured TERM objects.
term-attribute
The FILE, INITIAL, and TCP attributes have no defaults; you must specify them
before adding a TERM definition. The rest of the attributes have default values.
For information about configuration limits, see Appendix C, Configuration Limits
and Defaults.
FILE file-name
specifies the name of a terminal or a process emulating a terminal by converting
communications to the form required by a nonsupported terminal.
file-name must be represented in network form. It must begin with a $ (dollar
sign) followed by one to six alphanumeric characters, and the first character must
be alphabetic. The file name cannot exceed a total of seven characters including
the $ symbol.
If you do not specify a node name, the default node for file-name expansion can be
affected by several factors, including values you specify for the NonStop TS/MP
CMDVOL command and the NODEINDEPENDENT attribute of the TS/MP SET
PATHWAY command. For details, see Specifying Node Independence on page 2-5.
SET TERM term-attribute [ , term-attribute ]...
term-attribute is:
FILE file-name
INITIAL program-unit-name
TCP tcp-name
AUTORESTART number
BREAK { ON | OFF }
DIAGNOSTIC { ON | OFF }
DISPLAY-PAGES number
ECHO { ON | OFF | CURRENT }
EXCLUSIVE { ON | OFF }
INSPECT { ON [ ( FILE file-name ) ] | OFF }
IOPROTOCOL { 0 | 1 }
LIKE term-name
MAXINPUTMSGS number
PRINTER { file-name [ IS-ATTACHED ] }
{ IS-ATTACHED }
TCLPROG file-name
TMF { ON | OFF }
TRAILINGBLANKS { ON | OFF }
TYPE term-class