Pathway/iTS System Management Manual (G06.24+)

TERM Commands
HP NonStop Pathway/iTS System Management Manual—426748-002
10-24
SET TERM Command
term-type:term-subtype
The possible values are:
For intelligent devices, term-type must be either 7 or INTELLIGENT, and term-
subtype, which identifies the I/O protocol, must be one of the following:
For IBM 3270 terminals, term-type must be either 1 or IBM-3270, and term-
subtype, which specifies the screen display, must be one of the following:
For information about using IBM 3270 terminals in a Pathway environment, see the
Pathway/iTS TCP and Terminal Programming Guide.
If the TERMINAL IS clause of the running SCREEN COBOL program is not
present, the term-type value specified in this attribute is used. If the TERMINAL
IS clause is not present and this attribute does not specify a term-type value,
the TCP determines the device type from a call to the file-system DEVICEINFO
procedure.
If the TERMINAL IS clause of the running SCREEN COBOL program does not
specify a value for term-subtype, the term-subtype value specified in this
attribute is used. If the TERMINAL IS clause is not present and this attribute does
1:n or IBM-3270:n IBM 3270 terminal
3:0 or T16-6520:0 6520 terminal
4:0 or T16-6530:0 6530 terminal
5:0 or CONVERSATIONAL Conversational-mode terminal
6:0 or T16-6540:0 6540 terminal emulating a 6530 terminal
7:n or INTELLIGENT:n Intelligent device or web client
8:0 or T16-6530WP:0 6530WP terminal
0 WRITEREAD I/O protocol; write to device and wait for reply (default) in
conversational mode
1 WRITE and READ I/O protocol; write to device and then read from device in
block mode
2 WRITEREAD I/O protocol; write to device and wait for reply in block mode
term-
subtype Screen Size Model
1 480, 12 x 40 IBM 3277 M1
2 1920, 24 x 80 IBM 3277 M2
3 2560, 24 x 80, alternate 32 x 80 IBM 3278 M3
4 3440, 24 x 80, alternate 43 x 80 IBM 3278 M4
5 960, 12 x 40, alternate 12 x 80 IBM 3278 M1
6 3564, 24 x 80, alternate 27 x 132 IBM 3278 M5