Pathway/iTS System Management Manual (G06.24+)

TERM Commands
HP NonStop Pathway/iTS System Management Manual—426748-002
10-30
STATS TERM Command
STATS TERM Command
Use the STATS TERM command to display resource-usage and performance
statistics, including response time information, collected by the TCP. These statistics
provide information about TERM object operations. The STATS attributes of the SET
TCP command control the gathering of these statistics.
This command can be issued for configured and temporary TERM objects.
OUT list-file
directs output to the named list file; this could be a DEFINE name. If this option is
omitted, the PATHMON process directs the output to the PATHCOM list file; this is
typically the home terminal.
term-name
specifies one or more TERM objects. term-name can be either the name of a
single TERM object or several TERM object names separated by commas and
enclosed in parentheses.
STATS [ / OUT list-file / ]
{ [ TERM ] term-name
[ , term-attribute [ , term-attribute ]... ]
}
{ [ TERM ] ( term-name [, term-name ]... )
[ , term-attribute [ , term-attribute ]... ]
}
{ TERM * [ , option [ , option ] ... ]
}
term-attribute is:
COUNT number
FREQTABLE
INTERVAL number { HRS | MINS | SECS }
RESET
option is:
STATE state-type
TCP tcp-name
COUNT number
FREQTABLE
INTERVAL number { HRS | MINS | SECS }
RESET