Pathway/iTS System Management Manual (G06.24+)

TERM Commands
HP NonStop Pathway/iTS System Management Manual—426748-002
10-33
STATUS TERM Command
STATUS TERM Command
Use the STATUS TERM command to display the current status of a TERM object.
This command can be issued for configured and temporary TERM objects.
OUT list-file
directs output to the file that you specify; this could be a DEFINE name. If you omit
this option, the PATHMON process writes the output to the PATHCOM list file; this
is typically the home terminal.
term-name
specifies the name of a TERM object. You can use either a single TERM name or
several TERM names separated by commas and enclosed in parentheses.
DETAIL
includes status information on the TERM objects and the names of the program
units running on them.
TERM *
displays the status of all TERM objects described in the PATHMON configuration
file. If option is specified, displays the status of all TERM objects meeting the
criteria specified.
STATE state-type
specifies the state of the multiple TERM objects. Possible values are:
RUNNING NOT RUNNING
STOPPED NOT STOPPED
SUSPENDED NOT SUSPENDED
This option displays the status of TERM objects in any state.
You can substitute SEL for STATE.
STATUS [ / OUT list-file / ]
{ [ TERM ] term-name [ , DETAIL ] }
{ [ TERM ] ( term-name [, term-name ]... ) [ , DETAIL ] }
{ TERM * [ , option [ , option ]... ] }
option is:
STATE state-type
TCP tcp-name
DETAIL