Pathway/iTS System Management Manual (G06.24+)
TCP Messages (Numbers 3000-3999)
HP NonStop Pathway/iTS System Management Manual—426748-002
13-5
TCP Messages
3008 
Cause. There was an attempt to reference data outside the SCREEN COBOL 
program’s local data area.
Effect. The operation fails.
Recovery. Isolate and correct the problem within the SCREEN COBOL program. For 
instructions on how to locate the problem within the program, see General Information 
on page 13-1.
3009 
Cause. An attempt was made to execute a SCREEN COBOL program unit on an 
incompatible device. Or, if the device type is compatible, then a NonStop TS/MP 
internal error has occurred.
Effect. The operation fails.
Recovery. Check that the terminal type that was specified when the program unit was 
compiled is compatible with the physical terminal. If necessary, resolve the 
incompatibility. Otherwise, an internal error has occurred; contact your service provider 
and provide all relevant information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Your PATHMON configuration file and PATHMON process version
•
A description of the application task that was in progress when the error was 
encountered
•
Supporting documentation such as Event Management Service (EMS) logs, trace 
files, and dump files, if applicable
If your local operating procedures require contacting the GCSC, supply your system 
number and the numbers and versions of all related products as well.
3010 
Cause. There is an error in the terminal’s format routines. This is an internal error.
*3008* TERM term-name, ILLEGAL DATA REFERENCE
*3009* TERM term-name, REFERENCED SCREEN IS ILLEGAL FOR 
TERMINAL TYPE (%p-register)
*3010* TERM term-name, INTERNAL ERROR IN TERMINAL FORMAT 
ROUTINES (%p-register)










