Pathway/iTS System Management Manual (G06.24+)

TCP Messages (Numbers 3000-3999)
HP NonStop Pathway/iTS System Management Manual—426748-002
13-25
TCP Messages
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and dump files, if applicable
If your local operating procedures require contacting the GCSC, supply your system
number and the numbers and versions of all related products as well.
3104
Cause. The format of the file specified as the TCLPROG code file is invalid. This is an
internal error.
Effect. The TCLPROG files cannot be used.
Recovery. Contact your service provider and provide all relevant information as
follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Your PATHMON configuration file and PATHMON process version
•
A description of the application task that was in progress when the error was
encountered
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and dump files, if applicable
If your local operating procedures require contacting the GCSC, supply your system
number and the numbers and versions of all related products as well.
3106
Cause. The terminal control process (TCP) configuration attributes are incorrect. This
message is usually caused by incompatible values in the TCP configuration.
Effect. The TCP terminates.
Recovery. Use the INFO TCP command to check the values of the TERMBUF,
TERMPOOL, MAXTERMDATA, SERVERPOOL, MAXREPLY, MAXTERMS,
MAXSERVERCLASSES, and MAXSERVERPROCESSES attributes.
Use the ALTER TCP command to correct the configuration.
*3104* TCP tcp-name, ILLEGAL TCLPROG CODE FILE
*3106* TCP tcp-name, PARAMETERS FOR TCP CONFIGURATION TOO
LARGE