Pathway/iTS System Management Manual (G06.24+)

TCP Messages (Numbers 3000-3999)
HP NonStop Pathway/iTS System Management Manual—426748-002
13-32
TCP Messages
3144
Cause. A memory allocation error occurred within the router process while the router
was maintaining connection request status information for the TERM objects.
Effect. The router process terminates abnormally. The TERM objects that were
waiting for connections resend their requests to the router process.
Recovery. Restart the router process.
3145
Cause. An error occurred when the terminal control process (TCP) attempted to
create a session after establishing a socket connection with the client.
Effect. For the TERM object, the socket connection with the client is broken, the
socket is closed, and a new “waiting for connection” request is made to the router
process.
Recovery. Informational message only; no corrective action is needed.
3146
Cause. The communication protocol that the client used is not supported by
Pathway/iTS. Pathway/iTS supports the HTTP and TCP/IP Raw Socket protocols.
Effect. The operation fails, the session is closed, and the TERM object is reinitialized
for a new session.
Recovery. If the router process was not started with the protocol parameter set to
HTTP or SOCKET, restart the router process with one of these protocol settings.
3147
Cause. The TCP/IP session associated with the socket connection was null when the
terminal control process (TCP) either performed an I/O operation on the socket or
attempted to delete it.
Effect. The operation (send to/receive from the client or session deletion) fails. The
session is closed and the TERM object is reinitialized for a new session.
*3144* TERM term-name, MEMORY ALLOCATION ERROR IN ROUTER
*3145* TERM term-name, ERROR WHILE CREATING SESSION
*3146* TERM term-name, COMMUNICATION PROTOCOL IS NOT
SUPPORTED
*3147* TERM term-name, SESSION IS NULL