Pathway/iTS System Management Manual (G06.24+)

TCP Messages (Numbers 3000-3999)
HP NonStop Pathway/iTS System Management Manual—426748-002
13-44
TCP Messages
Recovery. Repeat the operation when the TCP is in the appropriate state.
3205
Cause. The specified terminal is not in the appropriate state for the attempted
operation.
Effect. The operation fails.
Recovery. Repeat the operation when the terminal is in the appropriate state.
3206
Cause. The number of terminals required for the current operation exceeds that
allowed by the MAXTERMS attribute in the terminal control process (TCP)
configuration.
Effect. The operation fails.
Recovery. Increase the value of the MAXTERMS attribute and repeat the operation.
3207
Cause. The request cannot be completed until the state of the specified object allows
the request’s completion. This message can be generated when a STOP SERVER
command is issued before a FREEZE SERVER operation is completed. In such a
case, the PATHMON process has not yet received messages from all its TCPs or
LINKMON processes.
Effect. None.
Recovery. Informational message only; no corrective action is needed.
3208
Cause. A total of 15 alternate TCLPROG file sets are already in use. The TCP can
only support 16 distinct TCLPROG file sets, including its own and 15 other file sets
specified in terminal configurations.
Effect. The operation fails.
*3205* TERM term-name, TERMINAL STATE DOES NOT ALLOW
OPERATION
*3206* TCP tcp-name, TCP CANNOT HANDLE MORE TERMINALS
*3207* object-name, REQUEST PENDING
*3208* TCP tcp-name, NO ROOM FOR ANOTHER ALTERNATE TCLPROG