Pathway/iTS System Management Manual (G06.24+)

TCP Messages (Numbers 3000-3999)
HP NonStop Pathway/iTS System Management Manual—426748-002
13-48
TCP Messages
•
A description of the application task that was in progress when the error was
encountered
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and dump files, if applicable
If your local operating procedures require contacting the GCSC, supply your system
number and the numbers and versions of all related products as well.
3218
Cause. The backup process took over processing from the primary process.
Effect. None.
Recovery. Informational message only; no corrective action is needed.
3219
Cause. A terminal control process (TCP) memory dump in the specified file has
completed.
Effect. None.
Recovery. Informational message only; no corrective action is needed.
3220
Cause. The TERM is configured with the INSPECT attribute set to ON, but the TCP is
configured with the INSPECT attribute set to OFF.
Effect. The HP Inspect symbolic debugger operation fails.
Recovery. Reconfigure the TCP with the INSPECT attribute set to ON.
3221
Cause. More than eight terminals per TCP attempted to use the Inspect process.
Effect. The Inspect operation fails.
*3218* TCP tcp-name, TAKEOVER BY BACKUP
*3219* TCP tcp-name, TCP MEMORY DUMP TAKEN - file-name
*3220* TCP tcp-name, INSPECT NOT ENABLED FOR TCP
*3221* TCP tcp-name, INSPECT TERMINAL TABLE FULL