Pathway/iTS System Management Manual (G06.24+)

Configuration Limits and Defaults
HP NonStop Pathway/iTS System Management Manual—426748-002
C-3
DUMP ZDUMP Values: ON | OFF
Suggested value is ON.
Default: OFF
ECHO ZECHO Values: ON | OFF | CURRENT
Default: ON
ERROR-ABORT ZERRORABORT Values: ON | OFF
Default: ON
EXCLUSIVE ZEXCLUSIVE Values: ON | OFF
Default: OFF
FILE ZFILE Values: One through seven alphanumeric
characters, including the $; the first
character after the $ must be alphabetic.
Default: N.A
.
HOMETERM ZHOMETERM Values: Name of home terminal for servers in
class.
Default: Home terminal of PATHMON.
INSPECT ZINSPECT Values: ON | OFF
Suggested value is OFF for production.
Default: OFF
IOPROTOCOL ZIOPROTOCOL Values: 0 | 1
Default: 0
IS-ATTACHED ZISATTACHED Values: YES | NO
or
T16-6530 | T16-6520 | IBM-3270
The value depends upon the command in
which the parameter is used.
Default: N.A.
MAXINPUTMSGLEN ZMAXINPUTMSGLEN Values: 0 through 6000 bytes; does not include
message header length.
Default: 133
MAXINPUTMSGS ZMAXINPUTMSGS Values: 0 through 2045
Default: 0
MAXPATHWAYS ZMAXPATHWAYS Values: 0 through 4095
Default: 0
MAXREPLY ZMAXREPLY Values: 0 through 32,767 bytes
Default: 2000
Table C-2. Limits and Defaults for Parameters (page 2 of 6)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults
* PATHCOM is the interactive management interface.
** SPI is the DSM management programming interface.