Pathway/iTS System Management Manual (G06.24+)

Configuration Limits and Defaults
HP NonStop Pathway/iTS System Management Manual—426748-002
C-4
MAXSERVERCLASSES ZMAXSERVERCLASSES Values: 0 through 4095
Total of MAXSERVERS values for all
server classes must not exceed value of
MAXSERVERPROCESSES.
Default: N.A.
MAXSERVERPROCESS
ES
ZMAXSERVERPROCESS
ES
Values: 0 through 4095
Default: N.A.
MAXTCPS ZMAXTCPS Described in
TS/MP Management Programming
Manual
.
MAXTELLQUEUE ZMAXTELLQUEUE Described in
TS/MP Management Programming
Manual
.
MAXTELLS ZMAXTELLS Described in
TS/MP Management Programming
Manual
.
MAXTERMDATA ZMAXTERMDATA Values: If NONSTOP set to 0: 0 through
2,147,483,647 bytes.
If NONSTOP set to 1: 2804 through
2,147,483,647 bytes.
Default: 8000
MAXTERMS ZMAXTERMS Values: 0 through 4095
Default: N.A.
NONSTOP ZNONSTOP TCPs: Values:0 | 1
Default:1
POWERONRECOVERY ZPOWERONRECOVERY Values: ON | OFF
Default: ON
PRI ZPRIORITY Values: 1 through 199
Default (PATHMON):
The priority assigned by $CMON, or if
$CMON is not active, the priority of TACL
minus 1.
Default (TCP):20 less than the priority of PATHMON.
Default (SERVER):10 less than the priority of
PATHMON.
PROCESS ZLINKMON
ZPROCESS
Values: One to six alphanumeric characters,
including the $; first character after the $
must be alphabetic.
Default: N/A
Table C-2. Limits and Defaults for Parameters (page 3 of 6)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults
* PATHCOM is the interactive management interface.
** SPI is the DSM management programming interface.