Pathway/iTS Web Client Programming Manual (G06.24+)

Logon Security and User Profiles
Compaq NonStop Pathway/iTS Web Client Programming Manual—520270-001
3-6
Configure the User Profile Server Class
Search for a Record
To search for an existing record in the database:
1. Enter the number 3.
2. When prompted, enter the user profile name for the record and press ENTER.
3. PROFDBM displays the current values of all the special registers in that record.
A blank after the equals sign for a register indicates a null value.
4. After the values are displayed, PROFDBM prompts you to select another command.
Delete a Record
To delete a record from the database:
1. Enter the number 4.
2. When prompted, enter the user profile name for the record and press ENTER.
3. “1 RECORD DELETED” is displayed, and PROFDBM prompts you to select
another command.
Exit the PROFDBM Utility
To exit and return to the TACL prompt, enter any character other than 1, 2, 3, or 4.
Configure the User Profile Server Class
Pathway/iTS provides a Pathway server program for the server that retrieves values from
the user profile database. To configure the server class for this server, add the following
lines to your Pathway/XM configuration source file or your PATHCOM configuration
file:
RESET SERVER
SET SERVER AUTORESTART 0
SET SERVER DEBUG OFF
SET SERVER HIGHPIN OFF
SET SERVER LINKDEPTH 1
SET SERVER MAXSERVERS 5
SET SERVER NUMSTATIC 2
SET SERVER PRI 115
SET SERVER PROGRAM PROFSERV
SET SERVER SECURITY "N"
SET SERVER TMF ON
SET SERVER VOLUME $vol.userprof-subvol
ADD SERVER USR-PROF-SERVER
Note. The name of the server class specified in the ADD SERVER command must be
USR-PROF-SERVER. User profiles will be retrieved correctly only if this name is used.
Note. For performance tuning in large applications, you might want to change some of the
specified configuration values later.