Pathway/XM 1.5 README for S Systems

II. Manuals Included on This CD
426761-001 Compaq NonStop(TM) Pathway/XM System Management Manual
III. Product Requirements
Required Hardware:
NonStop(TM) RISC-based servers
Minimum OS Release:
NonStop(TM) Kernel release D32 or D42
Requisite IPMs:
None
Required Software:
T9050D30 or later NonStop Kernel
T8343D30 or later Pathway/TS
T8344D31 or later TS/MP Pathmon
NOTE: When Pathway/XM is used in a multiple EXPAND nodes environ-
ment, and if one of the node is at D3x OS, the D38 version of
Pathway/XM must be installed on all nodes. For example, if
one of the node is at D3x and another node is at D4x or G0x,
the D38 version of Pathway/XM must be installed on both nodes.
The D46 version of Pathway/XM is a native (RISC only) mode
version and hence is not backward compatible with D38. The
D38 version of Pathway/XM is Axcelerated version and is upward
compatible with all D3x or later operating system.
IV. Installation Pre-requisites
None.
V. Pre-Installation Instructions
None.
VI. Basic Product Installation Instructions
Run IPSetup.exe and follow the IPSetup instructions through the
different steps in Installing Pathway/XM 1.5.
Copy the following files from their current location to
[ISV $Volume.subvolume].
- PATHCOM
- PATHMON
VII. Known Problems List
The following is a list of known problems:
1) When a Distributed Server class is updated to use another NODE
object through rolling configurations, it fails to re-start the
server processes. The LCS process associated with the server
class reports an internal error with PB.
The LCS process does not open the new PB process associated
file:///C|/READMEs PATHWAY/PathwayXM 1.5/ReadmePwyXM15Ssystems.txt
file:///C|/READMEs PATHWAY/PathwayXM 1.5/ReadmePwyXM15Ssystems.txt (2 of 3) [4/27/2004 11:12:46 AM]