Pathway/XM System Management Manual

Compaq NonStop™ Pathway/XM System Management Manual—426761-001
10-1
10
PXMCFG Statements and PXMCHK
Utility
This section describes the Compaq NonStop™ Pathway/XM configuration utility
(PXMCFG) statements that define the Pathway/XM environment and Pathway/XM
object configurations. It also gives the syntax of the TACL RUN command to start the
PXMCFG process. For more information about using the PXMCFG utility, refer to
Using the PXMCFG Utility on page 4-4.
The configuration, generated by the PXMCFG utility from the configuration statements
and written into the SuperCTL configuration file, is used by the PXMCOM commands
to monitor and manage the Pathway/XM environment. The statements in this section are
described in alphabetical order.
With these statements you can do the following:
•
Set and modify Pathway/XM environment attributes
•
Set and modify object attributes
•
Add object definitions to the configuration
Table 10-1
lists the statements and valid object types on which they can execute.
Note. This manual documents only TCP processes for which the code is in the program file
$SYSTEM.SYSTEM.PATHTCP2. All references to TCP denote this file name.
Table 10-1. PXMCFG Statements and Object Types
Object Types Statements
ADD COMMENT ENABLE INCLUDE RESET SET
NODE
XXX
PATHMON
X
PATHWAY
X
PROGRAM
XXX
ROUTER
XXXX
SERVER
XXX
SERVICE
XXX
TCP
XXX
TERM
XXX
Null
XX