Pathway/XM System Management Manual

PXMCFG Statements and PXMCHK Utility
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
10-46
SET ROUTER
If you omit this attribute, the default is OFF.
ON
starts the Inspect process when the SCREEN COBOL program begins and
breaks execution of the program before the first program instruction executes.
FILE file-name
specifies the name of the Inspect command terminal.
Defaults for file name expansion are based on the values of the SYSTEM and
DEFAULT attributes of the associated NODE object.
If you omit file-name, the default is the home terminal of the TCP.
OFF
does not start the Inspect process when the SCREEN COBOL program begins.
PRINTER file-name
specifies the name of the print device for each associated TERM object. If you omit
file-name, the SCREEN COBOL TERMINAL-PRINTER special register is set to
SPACES (that is, ASCII blanks).
Consideration
Before you define and add a ROUTER object, you must enable the router feature. Check
the following table; if your Pathway/XM environment is running on an operating system
release for which the router default is DISABLED, you must specify an ENABLE
ROUTER statement before the SET ROUTER statement.
NonStop
TM
Kernel OS* Pathway/XM Product Version
1.0 D32 1.0 D42 1.5 D38 1.5 D46
D46 & higher X X XPRd XPRe
G02 & higher X X XPRd XPRe
G06 & higher X X XPRd XPRe
Legend
X = Valid operating system release for Pathway/XM version
P = Supports Pathway/iTS web clients
Re = The router default is ENABLED.
Rd = The router default is DISABLED
* Compaq NonStop
TM
Kernel Operating System Release