Pathway/XM System Management Manual

PXMCOM Commands

Compaq NonStop™ Pathway/XM System Management Manual—426761-001

11-34

INFO TCP

This command displays the attribute values defined in the PATHMON configuration file

for a TCP process. This command does not display information about external TCPs

(TCPs that are controlled by another Pathway/XM environment).

term-name

specifies the name of a TERM object. The INFO TCP command is issued to the

TCP process that manages this TERM object.

GROUP group-name

specifies the name of a set of TERM objects, each configured as a member of the

specified group. The INFO TCP command is issued to each TCP process that

manages a TERM object associated with this group.

issues the INFO TCP command to all TCP processes in the Pathway/XM

environment. If option is also specified, PXMCOM issues the command to all

TCP processes meeting the criteria specified.

SEL or STATE

issues the INFO TCP command only to TCP processes in the specified state. You

can substitute SEL for STATE. . Possible states are:

PENDING NOT PENDING

RUNNING NOT RUNNING

STOPPED NOT STOPPED

This command affects only those TCP processes in the RUNNING or PENDING

state. If you specify any other state, the system displays the command prompt again;

it does not display any output or generate an error message.

INFO TCP { term-name }

{ GROUP group-name }

{ * , option }

option is:

{ SEL [ NOT ] { PENDING | RUNNING | STOPPED } }

{ STATE [ NOT ] { PENDING | RUNNING | STOPPED } }