Pathway/XM System Management Manual

PXMCOM Commands
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
11-37
INFO TERM
INFO TERM
This command displays the attribute values defined in the PATHMON configuration file
for a TERM object.
This command can be issued for configured and temporary TERM objects.
pathmon-object
specifies the internal PATHMON object name that is displayed in the header of a
STATUS TERM command. For example, PM0000 is the first pathmon-object.
term-name
specifies the name of a TERM object.
GROUP group-name
specifies the name of a set of TERM objects, each configured as a member of the
specified group. The INFO TERM command is issued to each TERM object
associated with this group.
*
issues the INFO TERM command to all TERM objects in the Pathway/XM
environment. If option is also specified, PXMCOM issues the command to all
TERM objects meeting the criteria specified.
SEL or STATE
issues the INFO TERM command only to TERM objects in the specified state. You
can substitute SEL for STATE. Possible states are:
RUNNING NOT RUNNING
STOPPED NOT STOPPED
SUSPENDED NOT SUSPENDED
This command affects only those TERM objects in the RUNNING or SUSPENDED
state. If you specify any other state, the system displays the command prompt again;
it does not display any output or generate an error message.
INFO TERM { [ pathmon-object. ]term-name }
{ GROUP group-name }
{ * , option }
option is:
{ SEL [ NOT ] { RUNNING | STOPPED | SUSPENDED } }
{ STATE [ NOT ] { RUNNING | STOPPED | SUSPENDED } }