Pathway/XM System Management Manual

PXMCOM Commands
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
11-49
RESUME TERM
RESUME TERM
This command restarts a screen program that has been suspended with the SUSPEND
TERM command. The RESUME TERM command changes the TERM state to
RUNNING.
This command can be issued to configured and temporary TERM objects.
pathmon-object
specifies the internal PATHMON object name that is displayed in the header of a
STATUS TERM command. For example, PM0000 is the first pathmon-object.
term-name
specifies the name of a TERM object.
GROUP group-name
specifies the name of a set of TERM objects, each configured as a member of the
specified group. The RESUME TERM command is issued to each TERM object
associated with this group.
*
issues the RESUME TERM command to all TERM objects in the Pathway/XM
environment. If option is also specified, PXMCOM issues the command to all
TERM objects meeting the criteria specified.
SEL or STATE
issues the RESUME TERM command only to TERM objects in the specified state.
You can substitute SEL for STATE. Possible states are:
RUNNING NOT RUNNING
STOPPED NOT STOPPED
SUSPENDED NOT SUSPENDED
This command affects only those TERM objects in the SUSPENDED state. If you
specify any other state, the system displays the command prompt again; it does not
display any output or generate an error message.
RESUME TERM { [ pathmon-object. ]term-name }
{ GROUP group-name }
{ * , option }
option is:
{ SEL [ NOT ] { RUNNING | STOPPED | SUSPENDED } }
{ STATE [ NOT ] { RUNNING | STOPPED | SUSPENDED } }