Pathway/XM System Management Manual

PXMCOM Commands
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
11-63
START TERM
SEL or STATE
issues the START TERM command only to TERM objects in the specified state.
You can substitute SEL for STATE. Possible states are:
RUNNING NOT RUNNING
STOPPED NOT STOPPED
SUSPENDED NOT SUSPENDED
This command affects only those TERM objects in the STOPPED state. If you
specify any other state, the system displays the command prompt again; it does not
display any output or generate an error message.
Consideration
The START TERM command is valid only for configured TERM objects. Temporary
TERM objects are started when you issue a RUN PROGRAM command.
Examples
The following commands start only the specified TERM objects:
START TERM TERM-1
START TERM-5, INITIAL IMFMENU
The following command starts all TERM objects in the STOPPED state that have TCP
processes running:
START TERM *, STATE STOPPED