Pathway/XM System Management Manual

PXMCOM Commands
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
11-69
STATS TCP
STATS TCP
This command displays resource usage and performance statistics collected by the TCP.
These statistics provide information about TCP operations and data space allocations.
This command does not display statistics for any external TCP processes (TCP
processes that are controlled by another Pathway/XM environment) that might be linked
to local server processes. The STATS attribute in the CONTROL TCP
command and the
PXMCFG SET TCP statement controls whether a TCP tracks its statistics.
term-name
specifies the name of a TERM object. The STATS TCP command is issued to the
TCP that manages this TERM object.
GROUP group-name
specifies the name of a set of TERM objects, each configured as a member of the
specified group. The STATS TCP command is issued to each TCP that manages a
TERM object associated with this group.
*
issues the STATS TCP command to all TCP processes in the Pathway/XM
environment. If option is also specified, PXMCOM issues the command to all
TCP processes meeting the criteria specified.
FREQTABLE
generates a frequency distribution table containing statistics for each terminal. The
frequency distribution table is not generatedeven if you specify the FREQTABLE
optionunder the following conditions:
•
There have been fewer than 50 response time measurements collected at the
time of the STATS request.
•
At the fiftieth measurement, the size of the time interval calculated is less than
0.01 second.
RESET
sets back to zero the counters used for the statistics measurements.
STATS TCP { term-name } [{ FREQTABLE | RESET }] ...
{ GROUP group-name }
{ * , option }
option is:
{ SEL [ NOT ] { PENDING | RUNNING | STOPPED } }
{ STATE [ NOT ] { PENDING | RUNNING | STOPPED } }
{ DETAIL }