Pathway/XM System Management Manual

PXMCOM Commands
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
11-71
STATS TERM
STATS TERM
This command displays resource-usage and performance statistics, including response
time information, collected by the TCP. These statistics provide information about
TERM object operations. The STATS attribute in the CONTROL TCP
command and
the PXMCFG SET TCP statement controls whether a TCP tracks its statistics.
This command can be issued for configured and temporary TERM objects.
pathmon-object
specifies the internal PATHMON object name that is displayed in the header of a
STATUS TERM command. For example, PM0000 is the first pathmon-object.
term-name
specifies the name of a TERM object.
GROUP group-name
specifies the name of a set of TERM objects, each configured as a member of the
specified group. The STATS TERM command is issued to each TERM object
associated with this group.
*
issues the STATS TERM command to all TERM objects in the Pathway/XM
environment. If option is also specified, PXMCOM issues the command to all
TERM objects meeting the criteria specified.
FREQTABLE
generates a frequency distribution table containing statistics for each terminal. The
frequency distribution table is not generatedeven if you specify the FREQTABLE
optionunder the following conditions:
•
There have been fewer than 50 response time measurements collected at the
time of the STATS request.
•
At the fiftieth measurement, the size of the time interval calculated is less than
0.01 second.
STATS TERM { [ pathmon-object. ]term-name }
[{ FREQTABLE | RESET }] ...
{ GROUP group-name }
{ * , option }
option is:
{ SEL [ NOT ] { RUNNING | STOPPED | SUSPENDED } }
{ STATE [ NOT ] { RUNNING | STOPPED | SUSPENDED } }