Pathway/XM System Management Manual

PXMCOM Commands
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
11-86
STATUS TCP
Consideration
You can direct the output of this command to a file by using the OUT command before
executing the STATUS command.
Display Fields
The fields in the displays returned by this command are as follows:
Display Field Description
ACCEPT Possible values are:
YES Terminal execution is at an ACCEPT statement.
YES-RESTART The terminal is in transaction mode; the transaction
has been restarted.
CPUS Current primary and backup CPUs
ERROR PATHMON environment error number
INFO Additional information regarding the error number.
PENDING Command that is pending to the terminal. The possible values are:
SUSPEND A SUSPEND command has been issued to the
terminal, but either the terminal's SCREEN COBOL
special register STOP-MODE is nonzero or the
terminal execution has not reached a state where it
can be suspended.
SUSPEND! A SUSPEND! command has been issued to the
terminal, but terminal execution has not reached a
state where it can be suspended.
STOP A STOP command has been issued to the terminal,
but either the terminal’s SCREEN COBOL special
register STOP-MODE is nonzero or the terminal
execution has not reached a state where it can be
suspended.
PROCESS Guardian process name of the TCP process.
RECOVERING Whether or not screen recovery is currently taking place for the terminal.
STATE Current state of the TCP process. Possible values are:
STOPPED TCP is stopped
PENDING TCP received a STOP command
RUNNING TCP is running and capable of controlling terminals
STOPMODE Current value of the terminal’s SCREEN COBOL special register.
Possible value is:
NON-ZERO The value of the register is nonzero.
TCP Name of the TCP process.
TERM Name of the terminal.