Pathway/XM System Management Manual

PXMCFG Messages
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
12-13
6848
Cause. The number of PATHMON processes required (as calculated by PXMCFG)
does not divide evenly into NUMSTATIC.
Effect. The value of NUMSTATIC is adjusted to be a multiple of the number of
PATHMON processes.
Recovery. No recovery is required; this is an informational message only.
6849
Cause. The value of NUMSTATIC was adjusted to a multiple of the number of
PATHMON processes and is now greater than MAXSERVERS.
Effect. The value of MAXSERVERS is adjusted to be equal to NUMSTATIC.
Recovery. No recovery is required; this is an informational message only.
6850
Effect. The PXMCFG process has determined that more than 70 TERM objects are
associated with a TCP process. Compaq experience indicates that assigning a large
number of TERM objects to a TCP has an undesirable effect on performance.
Cause. No effect; this is an informational message only.
Recovery. No recovery required. To decrease the ratio of terminals per TCP, modify
the TCP weights.
6851
Effect. The SET PATHMON NODES statement does not contain a CLIENT NODE
object.
Cause. No effect; this is an informational message only.
Recovery. No recovery required, however, it is easier to manage your system if you
separate the definition of nodes into client nodes and server nodes.
*6848* NUMSTATIC IN server-name ADJUSTED TO number-assigned
TO BE A MULTIPLE OF THE NUMBER OF PATHMONS
*6849* MAXSERVERS IN server-name ADJUSTED TO number-assigned
TO BE EQUAL TO NUMSTATIC
*6850* NUMBER OF TERMS (number-terms) EXCEEDS 70
*6851* NO CLIENT NODES FOUND ON SYSTEM WITH PATHMON
NODE: node-name