Pathway/XM System Management Manual

PXMCFG Messages
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
12-14
6852
Effect. The PXMCFG process has determined that less than 11 TERM objects are
associated with a TCP process. Compaq experience indicates that assigning a small
number of TERM objects to a TCP has an undesirable effect on performance.
Cause. No effect; this is an informational message only.
Recovery. No recovery required. To increase the ratio of TERM objects per TCP,
modify the TCP weights.
6853
Cause. The value specified for the router CONNECTIONS attribute exceeds either the
maximum or minimum limit.
Effect. The PXMCFG process does not generate a SuperCTL file.
Recovery. Specify a value between 1 and 32767 for the CONNECTIONS attribute.
6854
Cause. While the PXMCFG process was building modification plans (at the request of
an INVENTORY statement), it determined that a PATHMON process must be updated.
Effect. The PATHMON process cannot be updated online when the Pathway/XM
environment is started. The START PLAN * command displays the update plan as
pending.
Recovery. Either change the new configuration (the one to which you want to migrate)
so that the PATHMON object does not need updating, or stop the Pathway/XM
environment and then restart it. When the PATHMON process starts, it automatically is
updated, according to the migration plan.
*6852* NUMBER OF TERMS PER TCP (number-tcps) CALCULATED FOR
tcp-name IS LOW
*6853* VALUE OF CONNECTIONS EXCEEDS AN UPPER OR LOWER LIMIT
*6854* CANNOT UPDATE ACTIVE PATHMONS, MUST RE-START PATHWAY