Pathway/XM System Management Manual

PXMCOM, PB, and LCS Messages
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
13-9
PB Messages (Messages 6200-6399)
PB Messages (Messages 6200-6399)
The following messages are generated by PB processes.
6201
Cause. During its initialization phase, the PB process encountered an error while
reading the specified SuperCTL configuration file.
Effect. The PB process stops.
Recovery. Determine the problem using the error information included in the message
and correct the configuration. Refer to the Guardian Procedure Errors and Messages
Manual for more detailed information on the error.
If you cannot determine the problem, contact your service provider and provide all
relevant information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Your SuperCTL configuration file
•
A description of the application task that was in progress when the error was
encountered
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and dump files, if applicable
If your local operating procedures require contacting the Compaq Global Customer
Support Center (GCSC), supply your system number and the numbers and versions of
all related products as well.
6202
Cause. The PXMCOM process started the PB process with an incorrect number of
arguments.
Effect. The PB process terminates.
Recovery. This is an internal problem. Contact your service provider and provide all
relevant information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Your SuperCTL configuration file
*6201* Failed to configure, SuperCTL = filename,
Error = error-number, error-class
*6202* Invalid startup arguments