Pathway/XM System Management Manual

PXMCOM, PB, and LCS Messages
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
13-10
PB Messages (Messages 6200-6399)
•
A description of the application task that was in progress when the error was
encountered
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and dump files, if applicable
If your local operating procedures require contacting the Compaq Global Customer
Support Center (GCSC), supply your system number and the numbers and versions of
all related products as well.
6203
Cause. The PB process encountered the specified error when attempting to perform the
specified operation on the $RECEIVE file.
Effect. The PB process stops.
Recovery. Determine the problem using the error information included in the message
and correct the configuration. Refer to the Guardian Procedure Errors and Messages
Manual for more detailed information on the error.
If you cannot determine the problem, contact your service provider and provide all
relevant information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Your SuperCTL configuration file
•
A description of the application task that was in progress when the error was
encountered
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and dump files, if applicable
If your local operating procedures require contacting the Compaq Global Customer
Support Center (GCSC), supply your system number and the numbers and versions of
all related products as well.
6204
Cause. The primary PB process failed and the backup process has taken over.
Effect. PB processing continues normally.
Recovery. Informational message only; no corrective action is needed.
*6203* Received an error error-number, on $RECEIVE operation-
name operation
*6204* Backup taking over processing