Pathway/XM System Management Manual

PXMCOM, PB, and LCS Messages
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
13-11
PXMCOM Messages (Messages 6500-6799)
6205
Cause. The backup PB process failed.
Effect. The backup PB process stops.
Recovery. Informational message only; no corrective action is needed.
6206
Cause. A backup PB process was started in the specified CPU.
Effect. PB processing continues normally.
Recovery. Informational message only; no corrective action is needed.
PXMCOM Messages (Messages 6500-6799)
The following messages are generated by PXMCOM processes.
6500
Cause. The PXMCOM process stopped or terminated abnormally due to the condition
specified in the message. If the PXMCOM process terminated abnormally (abended),
the most likely cause is an internal program error.
If the PXMCOM process stopped, the most likely cause is a condition external to the
PXMCOM process, identified in the message.
Effect. The PXMCOM process stops or terminates abnormally.
Recovery. Determine and correct the problem using the error information included in
the message. Refer to the Guardian Procedure Errors and Messages Manual for more
detailed information on the error.
If you cannot determine the problem, contact your service provider and provide all
relevant information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Your SuperCTL configuration file
*6205* Backup process failed.
*6206* Starting backup process in CPU cpu-number
*6500* PXMCOM Termination. c: error-class, f: function,
ID: field-identifier, Detail: error-detail