Pathway/XM System Management Manual

PXMCOM, PB, and LCS Messages
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
13-13
PXMCOM Messages (Messages 6500-6799)
6504
Cause. An error was returned when PXMCOM attempted to read an OBEY file.
Effect. The commands in the OBEY file are not executed.
Recovery. Check the OBEY file to determine the problem.
6505
Cause. An error was returned when PXMCOM attempted to read the PXCCSTM file.
Effect. The PXMCOM process runs normally, but custom commands are not executed
when PXMCOM is started.
Recovery. Check the PXCCSTM file to determine the problem.
6506
Cause. An error was returned when PXMCOM attempted to read the input file
specified by the IN parameter.
Effect. The PXMCOM process fails.
Recovery. Reissue the command with an appropriate file name for the IN parameter.
6507
Cause. An internal error has occurred during the processing of the named object.
Effect. The command fails.
Recovery. This is an internal error. Contact your service provider and provide all
relevant information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Your SuperCTL configuration file
•
A description of the application task that was in progress when the error was
encountered
*6504* Read error on OBEY file
*6505* Cannot read PXCCSTM
*6506* Read error on IN filename
*6507* Internal problem with object (object-name)