Pathway/XM System Management Manual

PXMCOM, PB, and LCS Messages
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
13-20
PXMCOM Messages (Messages 6500-6799)
6532
Cause. The PXMCOM process encountered an error when attempting to open the
SuperCTL file.
Effect. The command fails.
Recovery. Determine the problem from the error information in the message.
6541
Cause. A PXMCOM command was issued for a SERVER object that has not been
defined or is in an invalid state (such as RUNNING, SUSPENDED, etc.) for the
command being issued.
Effect. The command fails.
Recovery. Determine the problem from the error information in the message, correct it,
and retry the command.
6550
Cause. A CPU weight is not valid because it would cause the sum of the weights not to
equal 100.
Effect. The command fails.
Recovery. Reissue the command with a CPU weight value that results in the correct
total.
6551
Cause. The changes specified in the command would result in fewer than two CPUs
being assigned to the NODE object.
Effect. The command fails.
Recovery. Reissue the CONTROL NODE CPUS command to define at least two
CPUs.
*6532* Cannot open SuperCTL file; status status-number
*6541* SERVER does not exist or not in the correct state
*6550* Invalid 'CONTROL NODE CPUS' command, total weights
must = 100
*6551* Invalid CONTROL NODE CPUS command, less than 2 CPUs
defined