Pathway/XM System Management Manual

PXMCOM, PB, and LCS Messages
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
13-21
PXMCOM Messages (Messages 6500-6799)
6552
Cause. A command specified a NODE object that is not defined in the SuperCTL
configuration file.
Effect. The command fails.
Recovery. Reissue the command with the correct NODE object name.
6554
Cause. The PXMCOM process was unable to obtain CPU numbers from the PB.
Effect. The START SERVER command fails.
Recovery. Use the STATUS NODE command to check whether the PB processes are
running.
6555
Cause. The PXMCOM process was unable to obtain CPU numbers from the PB.
Effect. The START PATHWAY command fails.
Recovery. Use the STATUS NODE command to check whether the PB processes are
running.
6556
Cause. The START PATHWAY command failed to execute.
Effect. The Pathway/XM environment is not started and may be in an unknown state.
Recovery. Use the STOP PATHWAY command to clean up the SuperCTL file.
Correct the problem causing the failure and then reissue the START PATHWAY
command.
*6552* NODE object does not exist
*6554* Unable to obtain CPU numbers from the PB for START
SERVER
*6555* Unable to obtain CPU numbers for START PATHWAY.
Defaulting.
*6556* START PATHWAY has failed. Please do a STOP PATHWAY,
correct the error situation, and try again.