Pathway/XM System Management Manual

PXMCOM, PB, and LCS Messages
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
13-22
PXMCOM Messages (Messages 6500-6799)
6557
Cause. A problem has occured that requires the Pathway/XM environment to be shut
down.
Effect. The effect of any PXMCOM command, except the STOP PATHWAY
command, is unpredictable.
Recovery. Issue the STOP PATHWAY command.
6558
Cause. An attempt to shut down the Pathway/XM environment has not executed
properly.
Effect. The effect of any PXMCOM command except the STOP PATHWAY
command, is unpredictable.
Recovery. Issue the STOP PATHWAY command.
6560
Cause. The PXMCOM process encountered an error when attempting to reset
configuration values to their initial settings during a cold start.
Effect. The START PATHWAY COLD command fails.
Recovery. Determine the problem from the error number.
6561
Cause. The PXMCOM process encountered an error when attempting to reset entity
states during a cold start.
Effect. The START PATHWAY COLD command fails.
Recovery. Determine the problem from the error number.
*6557* Pathway must be completely shut down. Issue STOP
PATHWAY first
*6558* Pathway was not shut down properly. Issue STOP PATHWAY
first
*6560* Unable to reset to original configuration
START PATHWAY COLD cannot complete. Error = error-number
*6561* Unable to reset to entity states in SuperCTL
START PATHWAY COLD cannot complete. Error = error-number