Pathway/XM System Management Manual

PXMCOM, PB, and LCS Messages
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
13-26
PXMCOM Messages (Messages 6500-6799)
6585
Cause. The PXMCOM process was unable to read $RECEIVE messages because an
internal error occurred.
Effect. The PXMCOM process terminates abnormally.
Recovery. Restart the PXMCOM process, and reissue the command. If this action does
not correct the problem, contact your service provider and provide all relevant
information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Your SuperCTL configuration file
•
A description of the application task that was in progress when the error was
encountered
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and dump files, if applicable
If your local operating procedures require contacting the Compaq Global Customer
Support Center (GCSC), supply your system number and the numbers and versions of
all related products as well.
6587
Cause. The PXMCOM process cannot start the specified process because the
PROCESS_CREATE_ procedure returned an error.
Effect. The process is not started and the command fails.
Recovery. Determine the problem from the error information in the message, correct it,
and reissue the command. Refer to the Guardian Procedure Errors and Messages
Manual for more detailed information on the error.
If you cannot determine the problem, contact your service provider and provide all
relevant information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Your SuperCTL configuration file
*6585* Failure posting a READUPDATE, c: error-class,
f: function, ID: field-identifier, Detail: error-detail
*6587* Failure starting type-name process. Error=error-number
(error-detail), NODE=node-name , FILE=file-name