Pathway/XM System Management Manual

PXMCOM, PB, and LCS Messages
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
13-41
PXMCOM Messages (Messages 6500-6799)
Effect. The PXMCOM command is not executed.
Recovery. Informational message only; no corrective action is needed.
6665
Cause. The PXMCOM process encountered an error when attempting to read the status
of an object in either the old or new SuperCTL file.
Effect. The modification plan is not completed; the SuperCTL may be in a invalid state.
Recovery. Issue a STOP PATHWAY command, then restart Pathway/XM specifying
the new SuperCTL file.
6666
Cause. A START PLAN command specified a modification plan for which previous
PLAN objects have not been completed.
Effect. The PLAN objects must be executed in the order shown by the INFO PLAN
command. The command is not processed.
Recovery. Use the STATUS PLAN * command to check which prerequisite
modification plan is in the PENDING state. Resolve any issue that prevents that PLAN
object from completing. Issue a START PLAN command for the prerequisite PLAN
object before reissuing the START PLAN command for the PLAN object receiving this
error.
6667
Cause. The assign name specified is not associated with the identified server class. The
CONTROL SERVER ASSIGN command can only be used to alter an assign that was
originally configured through PXMCFG.
Effect. The command fails.
Recovery. Check that the assign name was entered correctly and, if not, reissue the
command. If the assign name was correct, then the assign must be added through a new
Pathway/XM configuration.
*6665* Can’t retrieve status of modification PLAN
*6666* Prerequisite modification PLAN(s) not executed
*6667* Invalid CONTROL SERVER ASSIGN, previously not
declared